• Do not use the device or headphones for a long period of time at a high or uncomfortable vol-
ume level, since this can cause permanent hearing loss. If you experience any hearing loss or ring-
ing in the ears, consult a physician.
• Do not rest your weight on the device or place heavy objects on it, and avoid use excessive force
on the buttons, switches or connectors
Do not open:
• Do not open the device or attempt to disassemble the internal parts or modify them in any way.
The device contains no user-servicable parts. If it should appear to be malfunctioning, discontinue
use immediately and have it inspected by qualified service personal.
Water warning:
• Do not expose the device to rain, use it near water or in damp or wet conditions on it containing
liquids which might spill into any openings. Never insert or remove an electric plug with wet hands.
If you notice any abnormality:
• If the power cord or plug becomes frayed or damaged, or if there is a sudden loss of sound dur-
ing use of the device, or if any unusual smells or smoke should appear to be caused by it, immedi-
ately turn off the power switch, disconnect the electric plug from the outlet, and have the device
inspected by qualified service personnel.
Installation
GETTING STARTED
Place the speaker on a solid flat surface or use a solid speaker stand with 35mm
flange. Make sure that all fixings are tight.
Ø = 35 mm
Power connection and wiring
Please connect the power cable to 115/220(230)V 50/60Hz power voltage. Make
sure to set the power input selector to the available net voltage. Connect all
input/output signals with XLR and/or 6.3 mm jack cables.
After you finished all audio connections set master volume (if available) to
“0”.
Switch on audio source. Set Mic/Line level to 12 o'clock position and increase
master volume to comfortable level.