Control Panel
1 2 3 4
5
6
7
8
9
10
11
1
Phase switch
This switch reverses the polarity of the sub-
woofer.
2
Crossover switch
This switch activates the high pass filter for
the outputs.
3
POWER LED SIGNAL LED LIMIT LED
4
Line level controll
Rotary level control: Attenuates the level of
the signal sent to the subwoofer speaker.
5 Left output
Use this XLR connector for an external active
speaker.
6
Left input
Use this XLR connector for an external mixer
or source device.
7
GND LIFT
This switch lift the ground of the balanced
audio inputs from the earth-ground of the
amplifier.
8
Right input
Use this XLR connector for an external mixer
or source device.
9
Right output
Use this XLR connector for an external active
speaker.
10
AC Power
Use this connector for the power cable.
11
ON/OFF Power Switch
Speaker is "ON" when the switch is in the
"I" position, use this switch to set the
speaker power to ON or OFF.
.
XLR Wiring
Balanced Wiring
1
Ground/Shielding
3
Signal (-)
2
Signal (+)
Unbalanced Wiring
1
Ground/Shielding
3
Bridged to Pin 1
2
Signal (+)
