PRONAR ZKP350, Operating Instructions Manual, Page: 49 / 60

5.3
FIGURE 5.1A Changing reduction gear oil
(1) inlet plug
In order to change oil in reducer:
•
set windrower on a hard surface and level the machine
•
unscrew inlet plug (1),
•
unscrew drain plug on lower part of reducer,
•
drain oil into oil resistant tight container, container capacity should be about 4 litres,
•
if oil manufacturer recommends flushing gearing system, that operation should be
performed according to the guidelines of the oil manufacturer (these recommendations
may be detailed on the oil packaging)
•
tighten drain plug,
•
add oil until oil flows out of inlet opening, tighten plug.