PRONAR ZKP350, Operating Instructions Manual, Page: 22 / 60

2.6
•
Should it be necessary to change individual parts, use only those parts
indicated by the manufacturer. Non-adherence to these requirements may
cause danger to the health and the user's and other people's lives, and also
damage the machine.
•
After completing work connected with greasing, remove excess oil or grease.
•
Do NOT wear loose clothing, straps or whatever may become wrapped round
the rotating drive shaft. Contact with rotating articulated telescopic shaft may
cause severe injuries.
•
Do NOT go over and under the shaft or to stand on it equally during work as
also when the machine is parked.
2.2 PRINCIPLES WHEN TRAVELLING ON PUBLIC ROADS
•
When travelling on public roads, respect the road traffic regulations.
•
Do not exceed the maximum speed when travelling. Adjust your speed to the
road conditions.
•
Before beginning travel, the windrower must be placed in transport position and
raised using the rear three-point linkage system. While parking the windrower
should be lowered.
•
It is forbidden for the tractor driver to leave his position while the tractor is
moving.
2.3 DESCRIPTION OF MINIMAL RISK
Pronar Sp. z o. o. in Narew has made every effort to eliminate the risk of accidents. There is,
however, a certain minimal risk which could lead to an accident, and this is connected mainly
with the actions described below:
•
using the windrower for purposes other than those for which it is intended,
•
being between the tractor and the windrower while the engine is running and
when the machine is being attached,
•
being on the machine while the engine is running,
•
operating the windrower with the safety guards removed or faulty,