PRONAR ZKP350, Operating Instructions Manual, Page: 28 / 60

3.2
3.1 TECHNICAL SPECIFICATION
TABLE 3.1 ROTARY WINDROWER RAKES TECHNICAL DATA
CONTENTS UNIT ZKP 350
Dimensions
Total length in working setting
Total length in transport setting
Width in working setting
minimum
maximum
Width in transport setting
Height in working setting
Height in transport setting
mm
mm
mm
mm
mm
mm
mm
3 250
2,430
3,405
3,905
1 110
1,120
1 985
Technical specification
Raking width
Minimum tractor power demand
Maximum PTO speed
Tare weight
Work output
Recommended working speed
Noise emission level
mm
KM
RPM
kg
ha/h
km/h
dB
3 500
25
540
315
3.5
10
below 75
Tyres
Tyre
Air pressure in the tyres
-
kPa
15x6.0-6
200
3.2 ROTARY WINDROWER RAKES DESIGN
Construction of the rake carousel is shown in figure ( 3.1A ). The machine's main sub-
assembly is the support frame (1). In the front part is the system for mounting the machine to
the Three-Point Linkage of the tractor, category I or II. In the rear part of the windrower is the
transmission gearing system (2) of the working assembly. The reducer is powered by the
articulated telescopic shaft and then through the driveshaft placed in the extension (4) of the
support frame (1).