PRONAR T669/1, Operator'S Manual, Page: 77 / 137

SECTION 4 Pronar T669/1
4.11
Turn off tractor engine. Ensure that unauthorised persons do not have access
to the tractor cab.
Disconnect lines of pneumatic, hydraulic and electrical systems according to
instructions contained in section (4.2).
Remove cotter pin from pin of the hitch of the first trailer. Remove drawbar pin
and drive tractor away.
If the trailer is fitted with automatic rear hitch, lift the pin by the handle
(3) - figure (4.2).
IMPORTANT
Only double axle trailers may be hitched to the trailer.
4.4 LOADING AND SECURING LOAD
4.4.1 GENERAL INFORMATION CONCERNING LOAD
Before beginning loading make certain that the tailgate, side gates and chute slide gate are
properly closed and secured. The trailer must be positioned to travel forwards and be hitched
to the tractor. Loading should only take place, when trailer is placed on flat level surface and
hitched to tractor. If the trailer is equipped with tarpaulin cover, it should be rolled.
IMPORTANT
When a tailgate is tightly closed, that securing hooks must fully engage the rear gate
securing pin.
Regardless of the type of load carried, the user is obliged to secure it in such a manner that
the load is unable to spread and cause contamination of the road. If this is impossible, do
NOT transport this type of load.
If transporting materials which may cause damage to the floor and load box (dents, deep
scratches), it is recommended to shield the exposed surfaces with thick plywood, hard
particle board, planks or other materials of similar properties.