
Pronar T669/1
SECTION 2
2.6
•
When closing or opening the rear grain chute gate take particular care to avoid
crushing fingers.
•
Incorrect load distribution and overloading the machine may cause the trailer to
tip over or cause damage to its components.
•
Do NOT go or place hand between open side, tailgate and load box.
•
If the load does not pour from the raised load box immediately cease unloading.
The trailer may only be tipped again after removing the problem (sticking,
wedging), which prevented the load from pouring.
•
During winter particular attention must be paid to loads, which may freeze during
transport. When tipping the load box with frozen load the trailer may become
unstable and tip over.
•
Do NOT raise the load box if there is any danger whatsoever that the box will tip
over.
•
Do NOT jerk the trailer forwards if load is bulky or reluctant to pour and does not
unload.
•
Do NOT climb on load box during loading and unloading.
•
Lower the load box before proceeding to deal with a malfunction. If it is necessary
to raise the load box then secure it against dropping with the aid of load box
support. The load box may not be loaded, and the trailer must be connected to a
tractor and secured with the aid of chocks and also immobilised with the parking
brake.
•
After completing unloading, ensure that the load box is empty.
Summary of Contents for T669/1
