PRONAR T023, Manual

Page: 27 / 99

SECTION 2 Pronar T023, Pronar T023M
2.5
•
Inspect tightness of nuts before the first use of trailer, after the first travel under
load and then every 6 months of use or after 25,000 km, whichever occurs first. In
the event of intensive work, check the nut tightening at least every10,000 km. The
inspection should be repeated individually if a wheel has been removed from the
wheel axle.
•
Check the tyre pressure regularly.
•
In the event of any fault or damage whatsoever, do not use the trailer until the
fault has been fixed. The trailer must not be used when not in working order.
•
When operating the machine wear protective gloves and close fitting clothing and
use the appropriate tools.
•
Servicing and repair work should be carried out in line with the general principles
of workplace health and safety. In the event of injury, the wound must be
immediately cleaned and disinfected. In the event of more serious injuries, seek a
doctor's advice.
•
Repair, maintenance and cleaning work should be carried out with the tractor
engine turned off and the ignition key removed.
•
Regularly check the condition of the bolt and nut connections.
•
Before welding or electrical work, the trailer should be disconnected from the
power supply.
•
During the warranty period, any repairs may only be carried out by Warranty
Service authorised by the manufacturer.
•
Should it be necessary to change individual parts, use only original parts. Non-
adherence to these requirements may put the user and other people's health and
life at risk, and also damage the machine and invalidate the warranty.
•
In the event of work requiring the trailer to be raised, use properly certified
hydraulic or mechanical lifts for this purpose. After lifting the trailer, stable and
durable supports must also be used. Work must not be carried out under a trailer,
which has only been raised with a lift or jack.
•
The trailer must not be supported using fragile elements (bricks or concrete
blocks).