manualshive.com logo in svg

PRONAILS VISION PRO 800, User Manual

Share
Download
PRONAILS VISION PRO 800 User Manual Download Page 15

-  15  -

•  A further prerequisite is that components which affect the safety of the device are only replaced with original parts. 
•  Use the original packaging to return the device for repair or maintenance purposes. For correct packaging instructions see 

annex 2.

11  ACCESSORIES AND SPARE PARTS

ProNails authorised bits 

Find on our website www.pronails.com

Set of 5 dust bags with motor filter  

90105

Progressive Foot Pedal 

90104

Burr test gauge 

Contact your local distributor

ProNails Clinilotion 

Find on our website www.pronails.com

12  TECHNICAL DATA

Mechanical data 

Dimension (HxWxD) 

205 mm x 160 mm x 220 mm

Weight, including handpiece 

2,5 kg

Electrical data 

Rated voltage 

110-230 V AC / 50/60 Hz 

Power consumption 

100 W

Protection class 

Class II

Operating data 

Operating mode 

Continuous operation

Acoustic emission 

49 dB (A)

Speed micromotors 

5.000 – 30.000 Rpm

13 WARRANTY

The warranty is 1 year or a maximum of 500 operating hours, excluding consumables and wearing parts such as filter bags, 
motor filters, sealing rings, ball bearings, etc.

The warranty is extended by a further 500 operating hours, but does not exceed the original 12 months in total, if the 
recommended device maintenance has been carried out in good time. The manufacturer reserves the right to determine and 
analyse the cause of any problems

The warranty expires

•  if the liquids and consumables specified in the information for use are not used,
•  if the customer or other unauthorised persons tamper with the device or handpiece,
•  if the device is used for purposes other than intended,
•  if damage is caused by gross negligence or improper use. 

14 DISPOSAL

Please observe the following instructions for disposing of the device, as infectious materials such as tissue residues and 
grinding dust residues may be present on the housing, attachment and accessory parts and filters.

• Appliances marked with this symbol must not be disposed of with household waste! You are legally obliged to 
dispose of old appliances separately from household waste (European Directive 2012/19/EU). You can obtain further 
information on the disposal of your appliance free of charge from your contract partner from whom you purchased 
the appliance.

Summary of Contents for VISION PRO 800




















Reviews:

No comments

Brands by name

Popular brands

Load more brands