15 POSSIBLE ERROR MESSAGES
• In case of other problems or malfunctions, please contact your contract partner or the manufacturer. Have repairs
carried out by authorised specialists only.
Malfunction
Bit does not rotate
Weak suction power
Device does not work,
No display on the
Front panel
Possible cause
• Is the device switched on?
• The handpiece is not fully/properly
locked.
• Defect on cable or motor.
• The dust bag is full.
• Is the device switched on?
• Is the mains cable not plugged in
correctly?
• Socket has no mains voltage.
Measures
• Check that the main switch is turned on.
• Reopen the handpiece and then reclose.
Make sure to turn the outer sleeve to the
end position to align the marking of the
sleeve with the closed marking line on the
micromotor part (rose) of the handpiece.
• Contact your ProNails distributor
• Change dust bag.
• Check that the mains switch is turned on.
• Check that the mains plug is correctly
plugged in.
• Check the function of the socket.
Professionails NV/SA, Ruiterijschool 11, B-2930 Brasschaat, Belgium - Tel +32 (0)3 669 61 67 - Fax +32 (0)3 669 93 27 - WWW.PRONAILS.COM
