Erro! Use a guia Início para aplicar Überschrift 1 ao texto que deverá aparecer aqui.
29
8 Sensor Settings: save and reload
Here you can save and load your settings, and reload the factory settings. This
can be done in the “Sensor” – section or in the “Memory allocation” – section.
8.1 Sensor: Save settings, Load settings, Factory settings
SYSTEM / SENSOR / STANDARD SETTINGS
8.1.1 How to save configuration
Starting from „
System
” main menu please select „
Sensor
”, then select „Standard
settings” and „Save settings”.
Now you can choose one of 30 memory capacities.
Select the desired position. If the position is not occupied, the device displays: „
empty memory cell
”. Select „
save data set
” and confirm by "
OK
" button.
8.1.2 How to load previously saved configuration
Starting from „
System
” main menu, select „
Sensor
”, then „ standard settings”
and „load settings”. Select the position (from 1 to 30). If the position is free, the
device displays: „
empty memory cell
”. Then select „
load data set
” and confirm
by "
OK
" button.
8.1.3 How to reload factory settings
Starting from „
System
” main menu please select „
Sensor
”. Then choose
„standard settings”. Afterwards select „load factory settings”. Confirm by „
YES
”
button and finally confirm by "
OK
" button.
8.2 Memory allocation: Load and Delete Internal and External Memory
SYSTEM / MEMORY ALLOCATION
8.2.1 Copying of configuration
SYSTEM / MEMORY ALLOCATION / COPY DATA SET
Starting from „
System
” main menu please select „
Memory allocation
” and „copy
data set”. Then choose the source configuration to be copied (1 to 30).
Then choose the place to be saved to the available memory cell. At last select
„
start copy
” and finally confirm by "
OK
" button.
