Erro! Use a guia Início para aplicar Überschrift 1 ao texto que deverá aparecer aqui.
11
If you’re using an insertion sensor, by default there is a Pt 100 with two wire
connection. In this case the plug-in is already bridged.
If you want to connect your own two wired Pt 100 you have to bridge
I2
with
U2
and also
I1
with
U1
, as you can see on the picture below.
bridged Pt 100 connector
connected 2 wire Pt 100
For further modifications there are four additional connectors in the scope of
delivery, all in different dimensions as you can see on the picture below.
