LIZARD
This document is protected by copyrights.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
35
5.20. Guide adjustment tool
Allows the guide to be positioned parallel to an outside edge or a groove.
Fix the magnets to the guide, and position the guide on the workpiece along the
direction of welding. Loosen the levers and put the tool onto the first magnet, resting
the side of the pilot pin on an outside edge as in the figure below or placing the tip of
the pilot pin in a groove. Lock the levers in this position, pull the further part of the
guide off
the
workpiece (
1
), and begin moving the tool along the guide (
2
) to clamp
the successive magnets to the workpiece.
Part number:
UST-0466-53-00-00-0
1
2
