LIZARD
This document is protected by copyrights.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
8
22. Keep the torch cables from coming in contact with the surface. They must be
suspended to reduce the load of the carriage. Use only cables whose weight is
not more than 12 kg (27 lbs) for horizontal work and 8 kg (18 lbs) for vertical work.
23. Operating on curvatures with a convex or concave radius less than 1500 mm (5 ft)
is prohibited.
24. When operating at heights, use a safety line to protect the carriage from dropping.
25. Always use eye protection
(helmet, shield, and screen),
hearing protection, gloves,
and protective clothing during operation. Do not wear loose clothing.
26. Before every use, inspect the carriage to ensure it is not damaged. Check whether
any part is cracked or improperly fitted. Make sure to maintain proper conditions
that may affect the operation of the carriage.
27. Never try to manually stop the motion of the carriage. To stop, set the travel
direction switch to the
position ‘O’.
28. Maintain only when the carriage is unplugged from the power source.
29. Repair only in a service center appointed by the seller.
30. If the carriage falls from any height, is wet, or has any other damage that could
affect the technical state of the carriage, stop the operation and immediately
send the carriage to the service center for inspection and repair.
31. Never leave the carriage unattended during operation.
32. Remove
from
the
worksite
and
store
in
a secure
and
dry location when not in use.
