BM-16
This document is protected by copyrights.
Copying, using, or distributing without permission of PROMOTECH is prohibited.
13
3.6. Replacing the cutting inserts
Unplug the machine from the power source, and place the machine upside down.
Next,
loosen the clamping screw (
1
, Fig. 8)
to
access the milling head, and lower the
sleeve
as
far
as
possible
by
rotating
it
to
the
right
(
2
).
Then,
use
the
screwdriver
supplied
with the milling head to unscrew the screw (
3
), and remove the cutting insert (
4
).
Clean the socket, and then rotate the insert and install again or replace with a new
one
if
all
possible
to use edges are worn. Next, push and tighten the insert. The entire
bottom of the insert must be in full contact with the surface of the socket (
5
).
Before replacing the cutting inserts of the radius milling head, press and hold the
spindle lock button
6
and loosen the guiding roller with the 5 mm hex wrench (
7
).
Fig. 8.
Replacing the cutting inserts
Clean
the
threads
once
a
week
and,
if
necessary,
grease
the
fixing
screws
for
inserts
using an agent (for instance
copper
paste) that
will
prevent
the
screws
from
blocking.
3
1
2
4
7
6
5
INCORRECT
CORRECT
