1. Basic parameters
13
−
Regularly inspect the power cord for damage
and wear. The battery should only be charged
when the power cord is in perfect condition. The
power cord can only be replaced at the service
center.
−
Caution! If the power cord is damaged or broken,
immediately remove the plug from the socket.
−
Do not use the power cord to pull its plug from
the outlet. Do not step on the power cord. Re-
move the power cord from the area of the cutting
tool. Protect the power cord from heat, oil, sharp
edges.
−
The mains socket must fully match the power
plug of the power tool. It is strongly recommend-
ed not to use various adapters, but to install the
necessary plug socket. To connect the charging
station, use only grounding sockets. Using plug
sockets without grounding can cause the robot to
fail.
−
Use only industry
-
standard extension cords. The
cross
-
section of the extension cables must not be
less than the power cord of the tool. For a length
of up to 20 m, use an extension cable with a mini-
mum cross
-
section of 1.5 mm
2
or more, and when
using from 20 m to 50 m, use an extension cable
with a cross section of 2.5 mm
2
.
−
When using an extension cable wound on a drum,
pull the cable to its full length. If necessary, con-
sult an electrician.
