24
To form a list of files for a slide show, you must first upload the files to the robot (see
para.
"Uploading promo"
), then go to the tab
"Slide Show"
(found in the
"Settings"
menu) and select the files of interest in the right window, and then click
"Copy ".
4.
One need to hold B, and use the left stick, to make transportation to and from work.
5.
On completion of the transportation, it is necessary to transfer the robot to
autonomous mode by briefly pressing the
MODE key.
6.
Joystick (gamepad) switches off automatically
.
7.
Before you start, connect the robot to a Wi-Fi network. For that you need to enter the
settings menu (shown in the form of gears), press the "Select Network", select the
desired network and connect it to the robot. It is important to pay attention to the
characteristics of the connection: ping must be more
than 0 and less than 50,
Wi-Fi
signal level must be
not less than 80.
8.
On the display of the robot click
«Start»,
which is displayed in the form of
«Play»
button on the start screen.
Transportation to and from work
During the transportation to and from work after a visual check of working capacity, it is
necessary to carry out the robot transportation to and from work. To do this, follow these
steps:
1.
Remove the charger from the port
.
2.
Press the button on the robot.
3.
Turn the
MODE button
to turn on the joystick. The MODE button should glow
(bottom left segment).
J
oystick to control the robot PROMOBOT v.2.0
3.
OPERATION
MODE
MODE
indicator
B
Left stick
