PromLegion DX4085, User Manual

Page: 30 / 64

PromLegion Ltd Z-Meter DX4085/ User Guide
6.5.2. TE Modules Connection
Connect your TEC firmly as shown below.
Ensure minimum possible air convection in the area of measurement.
It is recommended to place the TEC as close to the Z-meter as
possible keeping internal chamber opened. Remember temperature
sensor is located in the chamber and considerable difference of TEC
and thermosensor’s temperature will result in mistakes in
measurements.
Note! TEC polarity check option must be switched of in case
of external measurements.
6.5.3. Make the pre-sets for measurements
TEC ID
If serial number of the testing is known or identified (in a case of
testing of RMT TECs) set the s/n using Cooler type ID from listed
database at reference Bar.
page 30 of 64 ver.1.00 (2017)