UltraTrak100 TX4 and UltraTrak100 TX8
User Manual
42
RAID 1 – M
IRRORING
When a disk array is mirrored, identical data is written to a pair of drives, while
reads are performed in parallel. The reads are performed using elevator seek and
load balancing techniques where the workload is distributed in the most efficient
manner. Whichever drive is not busy and is positioned closer to the data will be
accessed first.
With RAID 1, if one drive fails or has errors, the other mirrored drive continues to
function. This is called
Fault Tolerance
. Moreover, if a spare drive is present, the
spare drive will be used as the replacement drive and data will begin to be
mirrored to it from the remaining good drive.
Figure A2. RAID 1 mirrors identical data to two drives
Due to the data redundancy of mirroring, the drive capacity of the array is only the
size of the smallest drive. For example, two 1GB drives which have a combined
capacity of 2GB instead would have 1GB of usable storage when set up in a
mirrored array. Similar to RAID 0 striping, if drives of different capacities are used,
there will also be unused capacity on the larger drive.
Summary of Contents for UltraTrak100 TX4
Page 1: ...ULTRATRAK100 TX4 AND ULTRATRAK100 TX8 USER MANUAL ...
Page 6: ......
