UltraTrak100 TX4 and UltraTrak100 TX8
User Manual
34
When using
ID
mode, if you have multiple arrays within an UltraTrak100 unit, each
array will use a separate SCSI ID. When using
LUN
mode, each UltraTrak100 unit
will use a single SCSI ID, with the first array being LUN 0, the second array being
LUN1, etc. Enable Multiple LUN support in your SCSI adapter if you choose
LUN
mode. In most cases it is preferable to use
ID
mode.
SCSI ID
Select a SCSI ID between 0 and 15:
0
1 Selected
2
…
15
Press
or
to move these items on the LCD.
What you can do:
Press
SEL
:
Selects one of the following active functions:
from a list of numbers
between 1 and 15.
Selects the
SCSI ID
– The word
Selected
appears next
to the selected ID.
Press
:
Moves the active message line up. (
Active is marked by *.
)
Press
:
Moves the active message line down. (
Active is marked by *.
)
Press
EXIT
: Returns
to
the
Configure SCSI
menu.
Note
If you have multiple arrays and are using
ID
mode, be aware that each
array will use a SCSI ID. If, for example, you have created two separate
arrays and have selected
SCSI ID
4, array 1 would have
SCSI ID
4 and
array 2 would have
SCSI ID
5.
Summary of Contents for UltraTrak100 TX4
Page 1: ...ULTRATRAK100 TX4 AND ULTRATRAK100 TX8 USER MANUAL ...
Page 6: ......
