background image

Appendix B 

 

B-1 

Contacting Promise Support 

Promise Technical Support provides several support options for Promise users to 
access information and updates. We encourage you to use one of our electronic 
services, which provide product information updates for the most efficient service 
and support. 
 
If you decide to contact us, please have the following information available: 
 

• 

Product model and serial number 

• 

BIOS and driver version numbers 

• 

A description of the problem / situation 

• 

System configuration information, including: motherboard and CPU type, 
hard drive model(s), IDE/ATAPI drives & devices, and other controllers. 

 

Technical Support Services 

 

Promise Online 

T M 

Web Site 

http://www.promise.com 
(tech documents, drivers, utilities, etc.) 

 

 

USA Tech Support Center 
 

 

E-mail Support 

[email protected] 

Fax Technical Support 

(408) 452-9163 
Attention: Technical Support 

Phone Technical Support 

(408) 452-1180 
8:30-5:00pm M-F Pacific Standard Time 

If you wish to write us for support:  

Promise Technology, Inc. 
Attn: Technical Support  
1460 Koll Circle, Suite A 
San Jose, CA  95112 USA 

 

European Tech Support 
 

 

E-mail Support 

[email protected] 

Fax Technical Support 

+31 (0) 40 256 94 63 
Attention: Technical Support 

Phone Technical Support 

+31 (0) 40 256 94 61 
8:30-5:00pm The Netherlands Time 

If you wish to write us for support:  

Promise Technology Europe B.V. 
Attn: Technical Support  
1European Business Centre, Unit 1.25 
Luchthavenweg 81 
5657 EA Eindhoven, The Netherlands 

Summary of Contents for Ultra100 TX2








































Reviews: