manualshive.com logo in svg

Promise Technology FASTTRAK SX4300, User Manual, Page: 35 / 70

Share
Download
Promise Technology FASTTRAK SX4300 User Manual Download Page 35

Chapter 4: Installing Software Drivers

29

4.

Under Select the device driver you want to install, click 

Have Disk...

 

5.

Under Install from Disk, type 

A:\wnet

 wnet and click 

OK.

 

6.

Under Select the device driver you want to install, click 

Next

. 

7.

If a warning about Windows Logo testing appears, click 

Continue Anyway

. 

8.

Under Completing the Found New Hardware Wizard, click 

Finish

. 

9.

If the New Hardware Wizard appears again, close it. 

10. Click 

Yes

 to restart your PC. 

11. Remove the Promise FastTrak Driver diskette. 

12. When the Found New Hardware Wizard appears a second time, select 

Install the Software Automatically (Recommended)

 and click 

Next

. 

13. If a warning about Windows Logo testing appears, click 

Continue Anyway

. 

14. Under Completing the Found New Hardware Wizard, click 

Finish

. 

Note:

 Check the readme file, included with the driver files, for instructions on 

installing the RAID Console. 

Confirm Installation 

1.

From the Windows Desktop, open the Control Panel from My Computer. 

2.

Click on Performance and maintenance. 

3.

Click on the System icon. 

4.

Choose the Hardware tab, and then click the Device Manager button. 

5.

Click the + in front of SCSI controllers. 

Windows 2003 Promise FastTrak 

SX4300/8300 (tm) Controller

 should appear.

Windows XP

Install Driver During New OS Installation 

1.

Start the installation: Boot from the CD-ROM. Press F6 after the message 
“Press F6 if you need to install third party SCSI or RAID driver” appears. 

2.

When the Windows Setup window is generated, press S to specify an 
Additional Device(s) 

3.

Insert the Promise Technology driver diskette into drive A: and press Enter. 

4.

Choose 

WinXP Promise FastTrak SX4300/8300 (tm) Controller

 from the list 

that appears on screen, and then press the Enter. 1. Press S to use the 
driver on the floppy disk and then press Enter to continue with installation. 

5.

The Windows XP Setup screen will appear again saying “Setup will load 
support for the following mass storage devices:”  The list will include 

WinXP 

Promise FastTrak SX4300/8300 (tm) Controller

. 

Summary of Contents for FASTTRAK SX4300







































































Reviews:

No comments