Promise Technology FASTTRAK SX4300, User Manual, Page: 15 / 70

Chapter 2: Installation
9
2. Attach one Serial ATA data cable to each disk drive. Then attach the other
ends of the cables to the connectors on the FastTrak card (above).
3. Attach the Y-cable power splitters to each of the disk drives.
Create a Logical Drive
You will now use the onboard FastBuild BIOS utility to create a logical drive with
the attached drives. Even if you plan to use the WebPAM software to manage
your logical drive, you can still create your first logical drive using the FastBuild
Utility, as described here.
For an explanation of the logical drive concepts, see Chapter 5 of this manual.
1. Boot your system. If this is the first time you have booted with the FastTrak
card and drives installed, the Promise onboard BIOS will display the
following screen (below).
2. Press the Ctrl-F keys to display the FastBuild Utility Main Menu (below).