manualshive.com logo in svg

Promise Technology FastTrak SX Series Version 4.4, User Manual, Page: 62 / 102

Share
Download
Promise Technology FastTrak SX Series Version 4.4 User Manual Download Page 62

Promise Array Management 
 

 

58 

Controller Options 

The Controller has system information and settings several important features. 
Click on the Controller 

 icon in Tree View to see the Options in Information 

View. 

If any of these features are grayed out, it means they are not available on your 
hard drives or that you are accessing the RAID from a remote location. You 
must make these settings at the RAID PC.  

To return to the default settings, click Reset. To Apply the changes you have 
made, click Apply. 

 

Figure 54.  

Controller Options for FastTrak. 

System Information 

This describes the Controller type, in this case a FastTrak S150 SX4, the 
FastTrak driver and PAM Message Agent version and the IRQ the FastTrak card 
is using on the PC. This information may be helpful when upgrading your 
FastTrak or troubleshooting the PC. 

Summary of Contents for FastTrak SX Series Version 4.4







































































































Reviews:

No comments