manualshive.com logo in svg

Promise Technology FastTrak SX Series Version 4.4, User Manual, Page: 22 / 102

Share
Download
Promise Technology FastTrak SX Series Version 4.4 User Manual Download Page 22

Promise Array Management 
 

 

18 

 

Figure 16.  

List of RAID PCs on the network. 

4.  Click on the + icon in front of the RAID Server to see the list of networked 

RAID PCs. 

5.  From the list of networked RAID PCs, find the one you want to access, 

right-click on its RAID Machine 

 icon and select Login from the popup 

menu. 

 

Figure 17.  

Login dialog box. 

6.  In the Login dialog box, type your Username and Password, and click OK. 

You are now logged into a RAID PC over your network. 

Remote PAM Log-out 

Disconnect from a Message Server 

To disconnect from the network: 

•

 

Right-click on a RAID Server 

 icon and select Disconnect from the popup 

menu. 

•

 

Or right-click on the RAID Server 

 icon and click the Disconnect 

 icon 

in the Toolbar.  

 

Important 

 

This is the only correct way to log out a RAID Server from the 
system. 

Summary of Contents for FastTrak SX Series Version 4.4







































































































Reviews:

No comments