manualshive.com logo in svg

Promise Technology FastTrak SX Series Version 4.4, User Manual, Page: 39 / 102

Share
Download
Promise Technology FastTrak SX Series Version 4.4 User Manual Download Page 39

Chapter 4: User Interface 

 

 

35 

RAID Machine Menu 

When the RAID Machine 

 is selected, the RAID Machine menu appears. Its 

functions include: 

•

 Login 

•

 Logout 

•

 Screen 

refresh 

•

 

Rename the RAID Machine icon 

•

 Exit 

PAM 

RAID System Menu 

The RAID System menu appears with the RAID System 

 icon is selected. Its 

functions include: 

•

 Screen 

refresh 

•

 

Rename the RAID System icon 

•

 Exit 

PAM 

Maintenance Menu 

When other Tree View items are selected, the Maintenance menu appears. 
When the Controller 

 icon is selected, the Maintenance menu displays 

Controller functions: 

•

 

Read Events in the Event Viewer 

•

 

Clear Events from the Event Viewer 

•

 

Read Bad Sector Table 

•

 

Toggle the Beeper on and off 

•

 

Create a New Array 

•

 Refresh 

the 

screen 

•

 

Rename the Controller icon 

•

 

Exit PAM

 

Summary of Contents for FastTrak SX Series Version 4.4







































































































Reviews:

No comments