manualshive.com logo in svg

Promise Technology dc5750 - Microtower PC, User Manual, Page: 83 / 114

Share
Download
Promise Technology dc5750 - Microtower PC User Manual Download Page 83

Chapter 5: Monitor and Manage

77

1.

Click on the Logical Drive View 

 icon in Tree View.

2.

Click on the Logical Drive 

 icon of the logical drive you want to 

synchronize.

3.

Click on the Synchronization tab in Management View.

4.

In the Policy dropdown menu, select 

Fix

 if you want Synchronization or 

Redundancy Check

 if you do not want to correct inconsistencies.

5.

Click the 

Start Now

 button.

You can monitor Migration progress on the Logical Drive Migration tab. Click the 
respective buttons to pause, resume or abort the Synchronization or Redundancy 
Check.

Scheduled

To schedule a Synchronization or Redundancy Check:

1.

Click on the Logical Drive View 

 icon in Tree View.

2.

Click on the Logical Drive 

 icon of the logical drive you want to 

synchronize.

3.

Click on the Synchronization tab in Management View.

Summary of Contents for dc5750 - Microtower PC



















































































































Reviews:

No comments