manualshive.com logo in svg

Promise Technology dc5750 - Microtower PC, User Manual, Page: 29 / 114

Share
Download
Promise Technology dc5750 - Microtower PC User Manual Download Page 29

Chapter 3: Setup

23

2.

Click on the Logical Drive View icon and select the Delete tab.

3.

Check the box to the left of the logical drive you want to delete.
Logical drives created in FastBuild appear in WebPAM as PROMISE LD x.

4.

Click the 

Submit

 button.

5.

In the Confirmation box, click the 

OK

 button.

The temporary logical drive is deleted.

Create a New Logical Drive

A logical drive is a collection of physical drives in a RAID. To create a new logical 
drive:

1.

Click on the Logical Drive View 

 icon.

2.

Click on the Create tab.

3.

Select the radio button beside the RAID level you want for your logical drive.
WebPAM displays the RAID levels you can use with the available disk 
drives.
See “Choosing a RAID Level” on page 95 for information about the 
advantages and requirements of the available RAID levels.

Summary of Contents for dc5750 - Microtower PC



















































































































Reviews:

No comments