CAUTION!
Warning against illegal operation
Observe the regulations that apply
where the device is installed.
Fixed separating protective equipment
n
Cover
n
Dosing head
n
Housing
The customer may only remove the cover to
adjust the stroke length.
Customer should only remove the dosing head
in accordance with the "Repair" chapter.
Only the ProMinent Service department are
authorised to remove the housing.
Ensure that all protective equipment is properly
fitted before the pump is operated.
Other safety equipment
Vor Deckelabnahme
Pumpe abschalten
Switch off pump
before opening
Arrêtez la pompe
avant de l‘ouvrir
P_ALP_0010_SW
Fig. 2
Ensure that the warning label is always fitted
and legible.
Circuit breaker
The driver motor is fitted with a circuit breaker,
which automatically switches off the motor
when it overheats to more than 106 °C.
The circuit breaker switches the pump on again
once the motor has cooled down.
Information in the event of an emergency
In an emergency, either pull out the mains plug
or press the emergency-off switch, installed by
the customer, or disconnect the pump in line
with the emergency-shut-down guidelines for
your system!
If feed chemical escapes, also ensure that the
pump's hydraulic environment is at atmospheric
pressure. Adhere to the material safety data
sheet for the feed chemical.
Sound pressure level
Sound pressure level LpA < 70 dB according to
EN ISO 20361
at maximum stroke length, maximum stroke
rate, maximum back pressure (water)
Safety chapter
11
Summary of Contents for alpha ALPc 0230
Page 4: ...18 Declaration of Conformity for Machinery 49 Table of contents 4...
Page 50: ...50...
Page 51: ...51...