Promega Corporation ·
2800 Woods Hollow Road
·
Madison, WI 53711-5399 USA
·
Toll Free in USA 800-356-9526
·
Phone 608-274-4330
·
Fax 608-277-2516
· www.promega.com
Printed in USA.
Part# TM338
Revised 1/11
Page 15
4.
Internal Data Logging (IDL;
additional information is available in Section 7
)
4.A. Activating IDL
1.
Press the
DATA
button 2 times.
2.
Press the
ENTER
button to choose between logging and stop.
3.
Press the
ESC
button when finished to return to the HOME screen.
Note:
Once activated, the IDL is capable of storing 1000 data points
4.B. Downloading Data to a Computer
Important Note:
Before you can download data that have been logged on your QuantiFluor™
Fluorometer to a computer, that computer must have the Spreadsheet Interface Software Installed. See
Section 7 for computer requirements and installation instructions.
1.
Connect the QuantiFluor™ Fluorometer to the computer serial port using the provided
interface cable.
2.
Open the Spreadsheet Interface Software.
3.
Press the
DATA
button 3 times. The screen will display: "Download data: 5X<ENT> to start".
4.
Press the
ENTER
button 5 times to start downloading the data.
5.
Press the
ESC
button when the data have downloaded to return to the HOME screen.
Note:
If no data are logged, the screen will display the following message "Data logger has no
valid data."
4.C. Erasing Data from the QuantiFluor™ Instrument
1.
Press the
DATA
button 4 times. The screen will display "Erase data: 5X <ENT> to start."
2.
Press the
ENTER
button 5 times to erase all logged data from the QuantiFluor™ Instrument. When
the data are erased, the screen will display the following message: "Erase Data All data erased."
3.
Press the
ESC
button to return to the HOME screen.
