Optional Accessories
SPECIFICATIONS
• 42mm Diameter Legs • 10x Layer Carbon Fiber • CNC Machined Aluminum Apex
• 3 Leg Locking Angle Positions • 3 Stainless Steel Spikes (included)
• Max Load: 125 lbs.
HEAD MOUNTING
To install a Ball Head, Video Head or Gimbal of your choice first locate the 3/8-16 screw on the top of
the removable tripod plate. Next, match up your accessory and insert it over the screw. Tighten your
accessory in a clockwise fashion until it becomes snug. In some cases it may be necessary to tighten
your pan knob then tighten a little more. You may also remove the “42 Series” Top Plate if you feel it is
easier for you, however not necessary.
OPERATION
Before using your tripod, adjust each leg section to the desired length and angle setting.
Make sure the tripod is on a secure base and level surface and that all leg locks are securely
tightened before installing your camera onto the tripod.
NOTE: For added stability hang a bag or object from the middle hanger under the apex.
LEG ADJUSTMENTS
To accommodate uneven terrain, awkward shooting situations, or for low angle shooting the tripod
offers 3 adjustable leg angle adjustments. Each leg may be adjusted by pushing out the angle leg
lock on the apex. The lock is contoured to fit your finger and allows for convenient adjustments. Once
the lock is released move the leg into the desired position and press back into position to secure.
Repeat on the other legs if desired.
LEG SECTION ADJUSTMENT
Aluminum leg collars with built-in anti-rotation sleeves can be found at the end of each leg segment.
To adjust the tripod leg height securely hold the tripod and in a counter-clockwise motion loosen the
collar. Extend the leg to the desired shooting position and tighten clockwise until tightened.
MOLDED SPIKED FEET
The Pro-Stix “42 Series” Tripods are equipped with a non-marring rubber foot that works great in any
leg lock position. When the terrain calls for it, inside each foot features a large stainless steel spike
tucked away. Remove the foot counter clock-wise to reveal the spike then remove the spike. A hole is
drilled into the spike to assist in loosening and tightening if necessary by sliding an Allen key or small
item into the hole. Remove the spike and re-install on the other side of the foot.
TRB75
- 75mm Tripod Bowl Insert.
TRBU75
- 75mm Tripod Leveling Base.
visit: www.ProMediaGear.com for more details
TR423
3 (42mm top leg diameter)
58” in. / 147 cm
6.80 in. / 17.25 cm
26” in. / 66 cm
5.80 lbs / 2600g
TR424
3 (42mm top leg diameter)
58” in. / 147 cm
6.00” in. / 16.50 cm
21.25” in. / 60 cm
5.90 lbs / 2700g
TR424L
4 (42mm top leg diameter)
77” in. / 196 cm
6.70” in. / 15 cm
26.25” in. / 67 cm
6.40 lbs / 2900g
Sections:
Max Height:
Min Height:
Folded Length:
Weight:
