USER GUIDE //
ELECTRICAL STRETCHER SUPPORT SERIES: PB460/0 - PB460/1 - PB460/2
Review 03/20
12
·
In case of breakdown, the emergency operations must be carried out by at least 2 operators.
·
The installation of the stretcher support on the vehicle floor must be carried out ensuring compliance
with the safety requirements of EN 1789. In order to be in compliance with the requirements of EN
1789, the installer has the duty to check the fixation based on the exact position on the floor and based
on the structure of the floor itself.
·
The layout of the cables inside the structure should never be changed.
·
The device is intended to be used on Emergency vehicles.
·
Do not use it if the device has some kind of damage or poor cleaning condition.
·
The user must not have impairments that prevent proper reading and interpretation of information
contained on the device labelling and in this manual, and that could prevent proper operation of con-
trols.
·
Do not wash or clean the device with water jets or pressurized air.
·
Do not use drying machines
·
Before and after each use, check the proper functioning of the device; if alteration or performance is
noticed, it is necessary to restore its security status before the next use.
·
Before each use of the device, the perfect functioning status of the device must be checked as spe-
cified in the instruction manual. If any damage or anomaly is detected that could in any way influence
the correct functioning and safety of the device and / or the user, the device should be immediately
removed from service and the manufacturer should be contacted.
·
If the product comes with accessories with limited lifespan, do not use them after the expiration date.
·
Do not lubricate any part other than the one described in this manual.
·
Do not use the device if it has not been subjected to scheduled maintenance or required for normal
use.
·
Use only accessories and spare parts approved by the manufacturer.
·
Make sure that the scheduled maintenance has been carried out.
·
The fastener used to fix the stretcher on the stretcher support must comply with the requirements of
the EN 1789 standard, making it able to withstand accelerations of 10 g in all directions.
Always respect the maximum load capacity of the device, as indicated in this manual.
02
WARNINGS
