Promax TVHUNTER, User Manual

Page: 45 / 90

USER’S MANUAL. TVHUNTER .
10/2010 Page 9
3.2 Starting-Up and Main Screen
Next, it is explained steps to follow when starting up the instrument:
1.- Press any key ( [1], [2], [3]) for two seconds approximately.
2.- The instrument will start up in “ auto power off ” mode. It means that the
instrument will automatically switch off if you do not press any key for 5
minutes.
3.- If you wish to cancel the automatic power off, you should keep pressing
down the key [2] or [3] for five seconds when starting up the
instrument, until it appears the message “ manual power off ” on the
display. At the top of the screen appears one icon for this mode.
4.- On starting up, you will see the instrument presentation screen (Figure 2.-).
Figure 2.- Instrument Presentation Screen.
5.- Next, a screen will display the instrument’s name, company and user
names (editable by software) and the current version of firmware (Figure 3.-).
Figure 3.- Name of the instrument (TVHUNTER), user’s name (JOHN SMITH), company (ACME)
and firmware’s version (v3.00.74).
6.- Finally, it will appear the Detect screen (1> DETECT).