Promax RANGER Neo 2 User Manual Download

Page: 121 / 349

October 2021

109

Chapter 5: TOOLS

It displays the channel/frequency where is pointing the cursor and

access the tuning menu.

It displays the selected transmission standard menu and accesses

the signal parameters.

It displays the Tools menu.

It displays the Advanced menu.

In the Advanced menu there are some options for the spectrogram

configuration:

User measure: It allows the user to select a measure to view on screen

among the several available for each type of signal.

Details: It allows the user to view on screen the date and time when

maximum and minimum measures were reached. To quit this view press
the key

Clear measures: It clears the spectrogram, measurement and restarts the
timer.

The Attenuation Test function allows the user to easily check the response of the

telecommunications installations before antennas and headers are working. It

allows the user to evaluate the response along the complete range of

frequencies by measuring the losses (attenuation) in the distribution of TV

signals, comparing reference levels at headend output and at each house

antenna plugs.

5.8

Attenuation Test

5.8.1

Description

Attenuation test

Summary of Contents for RANGER Neo 2






























































































































































































































































































































































Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands

Promax RANGER Neo 2, User Manual

Search results

Summary of Contents for RANGER Neo 2

Reviews:

Related manuals for RANGER Neo 2

Brands by name

Popular brands