Promax Promax TV EXPLORER HD ISDB-Tb, Manual

Page: 198 / 206

USER’S MANUAL. TV EXPLORER HD ISDB-T/T
B
Page 88 11/2010
Whenever a DiSEqC program is sent, the commands that correspond to the
equipment status in relation to the Horizontal or Vertical polarization and High or Low
frequency band are also sent. This allows assuring that the installation status is the one
indicated by the equipment.
The COMMANDS option from DiSEqC menu allows to execute any of the
following commands:
CHARACTER COMMAND ASSOCIATED PARAMETER
POWER ---
RESET
---
STANDBY ---
General
SAT A/B A / B
SWITCH 1 A / B
SWITCH 2 A / B
SWITCH 3 A / B
Non-assigned Switch
SWITCH 4 A / B
POSITION A/B A / B
Assigned Switch
SWITCH OPTION A/B A / B
DISABLE LIMITS ---
ENABLE LIMITS ---
LIMIT EAST ---
LIMIT WEST ---
DRIVE EAST SEC. 1 to 127
DRIVE EAST STEPS 1 to 127
DRIVE WEST SEC. 1 to 127
DRIVE WEST STEPS 1 to 127
GOTO POSITION 1 to 255
HALT ---
STORE POSITION
1 to 255
Positioner
RECALCULATE 1 to 255
Table 5.- Available DiSEqC commands.
When selecting the COMMANDS option in the Spectrum Analyser mode
[13] in the screen will appear a dynamic execution line in order to use with the
positioner commands: DRIVE EAST / WEST . This allows to carry out a fine adjustment
in steps or in seconds to aim the antenna through the rotary selector [1].
Figure 64.- DiSEqC commands: DRIVE