September 2016
2-3
2
INSTALATION
2.1
Power Supply
The
MO-480
is an equipment powered through the mains for its operation.
The
MO-481
is powered through an AC Adapter.
2.1.1
Operation using the Mains Adapter
Connect the
MO-480
to the mains through the AC voltage connector located on
the rear panel.
Check if the mains voltage is according to the equipment specifications.
2.1.2
Operation using the AC Adapter
Connect the AC power adapter to the module
MO-481
through the power
connector on the rear panel.
Then connect the AC power adapter to the mains via the mains cord. Ensure that
your mains voltage is compatible with the adapter voltage.
2.2
Installation and Start-up
The
MO-480
modulator is designed for use as a rack-mounted 19 inches device
(1U chassis). The
MO-481
modulator it is in an open frame chassis and can be
used anywhere.
To start-up the
MO-480
, switch the main switch located in the rear panel to
position I (power on). To start-up the
MO-481
, just connect the AC adapter to
the mains. After a successfully start up, all LEDs of the
MO-480
blink (except
power). When the equipment is connected to the mains, the
POWER LED
remains lit.
