5-18
September 2016
5.2.2.3 Network Parameters
Figure 13.
Network configuration screen for DVB-T
Figure 14.
Network configuration screen for DVB-T2
In DVB-T2, this information is only for use of T2-MI transport streams.
In DVB-T2, these parameters are detected by the modulator in the case of "Mode
a/b T2-MI input" and they cannot be changed.
In the case of "Mode a TS", if user changes parameters, he has to be careful to
select the parameters according to the standard.
It is used to work in a network with other modulators.
These data is detected automatically through the T2-MI.
User can change the detected value by clicking on "use local value".
