September 2016
5-15
►
Clock reference (only for DVB-T)
You can select between the internal 10 MHz synchronism or one external.
►
Input modification:
It allows the user to change some parameters from the transport stream
coming from the input:
Null packet deletion: It deletes null packets.
PCR
Restamping.
Internal 10 MHz: It uses the internal synchronism.
T2-MI Data Piping PID.
To edit these parameters, user should tick on the checkbox “enable”.
►
IP input parameters:
It allows the user to change some parameters from the IP data coming from
the input:
IP Multicast: IP used if working in Multicast mode.
UDP Port: Destination port used by the UDP protocol to send IP.
UDP UDP/RTP: It allows the user to choose between UDP or UDP/RTP
protocol communication or Auto (it detects it automatically).
IGMP: Enables/Disables the IGMP protocol version 2 for the IP input.
Host IP: It is the IP address for the modulator, which works as a host and
where is send the IP data.
Host IP Mask: Mask for the modulator.
Host Gateway IP: Gateway for the modulator.
MAC Address: MAC address of the modulator.
