Promax MD-200, Manual

Page: 29 / 58

USER’S MANUAL. MD-200
September 2002 Page 5
E
n
g
lis
h
2 SAFETY RULES
2.1 General
*
This is a Class I equipment, for safety reasons plug it to a supply line with the
corresponding ground terminal.
*
This equipment can be used in Overvoltage Category III installations and
Pollution Degree II environments.
*
When using some of the following accessories use only the specified ones to
ensure safety:
Mains Cord
Test leads
*
Observe all specified ratings both of supply and measurement.
*
Remember that voltages higher than 60 V DC or 30 V AC rms are dangerous.
*
Use this instrument under the specified environmental conditions.
*
The user is only authorized to carry out the following maintenance operations:
Batteries replacement.
Replace the fuses of the specified type and value.
On the Maintenance paragraph the proper instructions are given.
Any other change on the equipment should be carried out by qualified
personnel.
*
Follow the cleaning instructions described in the Maintenance paragraph.