Promax GV-698, Instruction Manual

Page: 25 / 42

- 69 -
- Limitations in the number of characters depends on character size. Unless
otherwise directed by the customer in his order application, wording will be
recorded in accordance with an aesthetic rule (using the greatest size allowed,
horizontal and vertical centering inside a window).
- Because of the scarce variety of letters available by the character generator,
it would be preferable to send us a template with that wording to be included,
if more definition letters are wanted. In this way, more quality will be achieved,
above all in large size letters (see type 1).
Two application cards are available, attached to the last page of the manual.
If required, further cards may be requested to I. E. PROMAX S.A.
To order a logo, just fill up one of the two templates printed on the "Order
Card". Dimensions are scale of those actual ones displayed in the TV set screen.
IMPORTANT NOTICE
If you want to generate a logo, it is advisable to attach an original anagram. Your
anagram may be picked out from any business card or document; it gives a very
useful additional information in digitalizing the requested logo properly.
Figure 10.-
Logo example.
In the event diverse logos would be required for different applications, a "logo
library" could be created if necessary, including exchangeable EPROMS for every
particular case.
Distributors and manufacturer are responsible for EPROM recording and
procedures. Please refer to them for applicable tariffs or whatever matter.
4.6.2 Replacing the EPROM memory
On receiving the EPROM with the recorded text or logo, replace the current
EPROM by the one received. This step is to be performed with the unit turned off.
Special care should be given to following points of this process:
- Open the GV-698 by releasing the 4 locking screws inside the support legs.
- Draw out the board fastening bar by releasing the 2 screws at the top bar.
- Pull out the logo generation card (2nd card from the left).
05/96 GV-698