Promax GV-698, Instruction Manual

Page: 17 / 42

- 61 -
4.2.3 Retrieving a configuration
Take the following steps to retrieve the desired configuration:
1) Press the RCL button corresponding to the group [4]
2) The LED situated below the MEM position will light and the message "RCL
XX" on the display will indicate that this option has been selected, "XX"
indicating the number of the memory currently selected.
3) Select the memory position in which you wish to store the information by
means of the TUNE SELECT [7] rotary selector.
4) Press the RCL button again, by which the process will be completed.
The entire configuration stored (chart/system-standard/channel-frequency)
will be updated within the equipment.
4.2.4 Rotary selector
Figure 5.- Selection of the function of the rotary selector.
The TUNE SELECT [7] rotary selector incorporated in the GV-698 enables
selection of chart, system, standard, channel and frequency to be simply made.
The SEL button in the group [5] permits the selection of the function indicated
by the rotary selector. By pressing this button repeatedly, the information corresponding
to the type of chart, system, channel and frequency is successively selected. The LED
situated below each function is lit in order to indicate the selected function.
05/96 GV-698