CONTROL MODULE.
DT-802
6.-
Use the button "
Update
"
to begin the process. The
updating progress can be watch through the status bar.
7.-
The time took by the process is relative. It is depends on the size file and
the number of units to update.
8.-
The program will update all units of the same type in the head end, that is,
if the firmware affects units DT-30X, and there are more than one in the
head end, they all will be updated.
9.-
When the progress bar reaches 100%, it pops-up a window with the
message box "Update process successful".
10.-
Once the process is finished, quit the program and restart the module
DT-802
.
For more details please, read the manual that is supplied with the CD or visit our
website:
Page 28
04-2015
