En
g
lis
h
CONTROL MODULE.
DT-802
04-2015
Page 25
4.7.4.2 Configuration options DT-802.
The options of the menu
CONFIGURATION
at the module of control
DT-802
are:
- Manual
Assigment.
If the Auto assigment done automatically by the system when starting does
not match the actual location of the modules in the rack, this option allows you
to change this assigment manually.
1.-
Press
ENTER
to get into the menu. With
RIGHT
and
LEFT
arrows you can see the correspondence between the current
location assigned (second line) and the modules (third line).
Figure 16.-
Manual assignment.
2.-
Press
ENTER
again. The second line is selected (it shows an arrow
next to it) and you can move the third one, which is the name of the
modules, using
LEFT
and
RIGHT
arrows.
Figure 17.-
Change of placement module.
