The diagram below shows the order of selection using the rotary switch of the
FCT (F2) function.
F igure 7.-
Menu of the F2 function.
N ote:
The new value chosen in functions F1, F2 and F3 only remain in the memory
until the battery is removed. When the battery is removed the instrument undergoes
a RESET and the values configured through the F1, F2 and F3 functions are lost.
When the battery is reconnected, the instrument adopts the factory-configured
values or those programmed by means of RM-006.
4.3 C onnection to the computer
The system may be connected to a PC by means of the connection cable which
is supplied with option RM-006.
D o not connect any cable other than that supplied by the manufacturer with
option R M -006, otherwise serious damage may be caused to the equipment.
1) Prior to connecting the equipment to a PC, disconnect both from their
respective power supplies.
2) Connect the end of the connection cable corresponding to the P R O M AX -6
to connection [6] and the other end to the parallel port of your computer.
(See the RM-006 operation manual for further information).
