Promate DigiScope
Digital Microscope User’s Manual
18
installation.
b. Place installation CD into CD-Rom driver, select “driver installation”.
Q4. If USB cable connected to DigiScope Digital Microscope before driver
installation?
A: Remove USB cable from DigiScope Digital Microscope for 5 sec., and then
plug it back to DigiScope Digital Microscope.
Q5. How to connect “ DigiScopeCapture” ?
A: Complete driver installation, connect USB cable to DigiScope Digital
Microscope, and then Execute “ DigiScopeCapture” application procedure.
Q6. How to uninstall driver ?
A: Remove USB cable from DigiScope Digital Microscope, execute “uninstall” in
application procedure “ DigiScope Digital Microscope”.
Q7. When connecting to PC, why the picture is slow or unsmooth?
A: a. Probably your PC’s configuration is not sufficient enough. Please check the
system requirements as mentioned in this User’s Manual.
b. Probably your PC’s CPU or memory is overloaded by executing too many
application software. Try to shut down other application and restart your
system to release the memory.
c. Probably your system has being attacked by virus, which may
dramatically degrade your system’s performance.
Q8. What should we do, if DigiScope Digital Microscope is not working normally?
A: Please reset the system by disconnecting all the cables from DigiScope
Digital Microscope. Wait for about 5 sec., re-connecting the cables to restart.
Copyright
Promate Technologies reserves all patents, trademarks, copyrights, and other
intellectual rights regarding the user manual. Copying the manual in part or in full
without the written permission of Promate Technologies is prohibited. Illegal usage
of part or the entire document may result in criminal penalty.
Windows 98se, Windows 2000 and Windows XP are Microsoft company’s trademark.
