Attaching to the camera
1. Turn the power of the camera OFF before attaching the receiver to camera.
2. Please make sure the transmitter and receiver are both set to the same channel. There are 16 channels
available.
1 2 3 4
ON
D IP
1 2 3 4
ON
D IP
3. Slide the receiver gently into your cameras hot shoe as shown. Rotate the lock nut clockwise to tighten the
receiver on your camera.
4. Plug the end of the camera release cable (separate purchase required) into the receiver as shown. Plug the
other end into the camera remote socket (note that the appearance of this end is differentdepending upon
your camera model).
Note:
Ensure you do not connect the cable the wrong way. Attempting to connect the cable in the wrong direction
may cause damage to your camera, the cable, the remote or all of the above.
