background image

 

20

 

¾

 

Customer 

Service 

Warranty 

     

 
We are committed to customer satisfaction and value your business. If at any time you 
experience a problem with your new ProSafe Isolation Transformer simply call us at 
1-800-824-0524 for technical support. 

 

ProSafe Isolation Transformer 

Five Year Limited Factory Warranty 

 

 Each product is guaranteed against defects in material and workmanship to the original 
consumer in normal use for five full years from the date of purchase. Professional Mariner, LLC 
will at its discretion will repair or replace free of charge any defects in material or workmanship. 
The following conditions apply: 
 

 

Warranty is calculated from date of manufacture if not registered within two weeks of sale. 
(Register your product at 

www.promariner.com

 

Warranty void if unauthorized repairs were attempted. 

 

Customer is responsible for returning the product to Professional Mariner, LLC. 

         Inbound shipping costs must be prepaid. 

 

This warranty does not cover blemishes due to normal wear and tear or damages caused 
by accidents, abuse alterations or misuse. 

 
Purchase or other acceptance of the product shall be on the condition and agreement that Professional 
Mariner SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND. 
(Some states do not allow the exclusion or limitation of consequential damages, so the above limitations 
may not apply to you.) This warranty is made in lieu of all other obligations or liabilities on the part of 
Professional Mariner. Professional Mariner neither assumes nor authorizes any person for any obligation or 
liability in connection with the sale of this product. 

 

To make a claim under warranty, call our customer service line at 1-800-824-0524 or write directly to 
Professional Mariner, LLC at P.O. Box  968, Rye, NH 03870, identifying the product and describing the 
application used in. Follow the company’s return policy, which will be provided by the company. 
Professional Mariner will make its best effort to repair or replace the product, if found to be defective within 
the terms of the warranty, within 30 days after return of the product to the company. Professional Mariner 
will ship the repaired or replaced product back to the purchaser. 

 

This warranty provides to you specific legal rights and you may also have other rights, which vary from state 
to state. This warranty is in lieu of all other, expressed or implied. 

 

Professional Mariner, LLC.  

 

 

 

Professional Mariner, LLC.  

Headquarters 

     Factory 

Service 

Center 

P.O. 

Box 

968 

     200 

International 

Drive, 

 

Rye, 

NH 

03870 

     STE- 

195 

Phone: (603) 433-4440  

 

   Portsmouth, 

NH 

03801 

Fax: 

(603) 

433-4442 

    Phone: 

1-800-824-0524 

 

 

    

      

Visit us on the web at: 

www.promariner.com

 

Summary of Contents for 411-SA02-036






















Reviews: