Promaker PRO-TP800, User Manual

Page: 2 / 40

2
PRODUCT SPECIFICATIONS
Voltage /
Frequency
120V / 60Hz
Power 800W
Speed 0-2800rmp
Chuck size 1/2”(13mm)
Weight 4.84Lbs
Cord 2m
GENERAL SAFETY WARNINGS
WARNING: Before using this
tool or any of its accessories, read
this manual and follow all Safety
Rules and Operating Instructions.
The important precautions,
safeguards and instructions
appearing in this manual are not
meant to cover all possible
situations. It must be understood
that common sense and caution
are factors which cannot be built
into the product.
EYE. EAR & LUNG PROTECTION
ALWAYS WEAR EYE
PROTECTION THAT
CONFORMS WITH CSA
REQUIREMENTS or ANSI
SAFETY STANDARD Z87.1
FLYING DEBRIS can cause
permanent eye damage. Prescription
eyeglasses ARE NOT a replacement
for proper eye protection.
WARNING: Non-compliant
eyewear can cause serious injury if
broken during the operation of a
power tool.
WARNING: Use hearing
protection, particularly during
extended periods of operation of
the tool, or if the operation is noisy.
SAVE THESE INSTRUCTIONS FOR
REFERENCE
WEAR A DUST MASK THAT IS
DESIGNED TO BE USED
WHEN OPERATING A POWER
TOOL IN A DUSTY
ENVIRONMENT.
WARNING: Dust that is created by
power sanding, sawing, grinding,
drilling, and other construction
activities may contain chemicals that
are known to cause cancer, birth
defects, or other genetic abnormalities.
These chemicals include:
• Lead from lead-based paints
• Crystalline silica from bricks,
cement, and other masonry
products
• Arsenic and chromium from
chemically treated lumber
The level of risk from exposure to these
chemicals varies, according to how
often this type of work is performed.
In order to reduce exposure to these
chemicals, work in a well-ventilated
area, and use approved safety
equipment, such as a dust mask that
is specifically designed to filter out
microscopic particles.
ELECTRICAL SAFETY
WARNING: To avoid electrical
hazards, fire hazards or damage to
the tool, use proper circuit protection.