Promaker PRO-TP500, User Manual

Page: 8 / 40

8
This symbol designates that
this tool is listed with U.S.
requirements by Underwriters
Laboratories.justada a los
requisitos de los EE. UU. y
Canadá por Underwriters
Laboratories.
KNOW YOUR HAMMER DRILL
ACCESORIES
AVAILABLE ACCESSORIES
WARNING: Use only accessories
that are recommended for this
drill. Follow the instructions that
accompany the accessories. The use
of improper accessories may result
in injury to the operator or damage to
the drill.
WARNING: If any part is missing
or damaged, do not plug the drill into
the power source until the missing or
damaged part is replaced.
ASSEMBLY AND OPERATING
FORWARD/REVERSE SWITCH
Fig.1
The forward/reverse switch (1)
is conveniently mounted above
the trigger switch (2) (Fig. 1). To
make the drill rotate clockwise for
drilling, push the forward/reverse
switch to the right. To make the drill
rotate counter-clockwise, push the
forward/reverse switch to the left.
NOTES:
a) Never change the position of the
forward/reverse switch while the
chuck is turning.
b) There is no dead center position
for the forward/reverse switch. The
tool will run only when it is in either
the full left or full right position.
VARIABLE-SPEED TRIGGER SWITCH
Fig.2