TR515 User’s Manual
1
1. Installing the TR515
DC Jack
Comm. Port
Magnetic/ barcode
head on this side
IN button & LED
OUT button & LED
Comm. Status
Bell Control
Wall-mount and desktop operation
The TR515 can be used either as a wall-mount (default, see Figure above)
or desktop device. Machine needs to be rotated 180 degrees when used on a
desk. For this reason, the TR515 comes with two different LED plates (with their
artworks rotated 180 degrees with respect to each other). Machine’s LED can
also display time and other data in a “normal” (wall-mount), or desktop fashion.
There is an orientation setting provided that allows you to select display mode
(see Section 4).
1. RS-232/485 Interface Versions
The TR515 supports two different interfaces: RS232 for single-terminal
communications, and RS485 for multi-terminal communications. Only one
TR515 can be attached to the PC’s serial port using the RS232 interface. Up to
32 units can be interconnected using the multi-terminal RS485
communications.`
RS232 arrangement is simple: just plug the RS232 cable (supplied) into the
TR515 and connect the other side to the PC’s serial port.
Using RS485 requires a special adaptor- CON485 (must be purchased
separately). CON485 is a “smart” RS232
!
RS485 converter that allows for
higher data transfer rates between the PC and TR515s.
Summary of Contents for TR515
Page 1: ...TR515 Time Recorder V1 00...